What to do if my Beltone Rely RLY4CIC-W-LP Hearing Aid has no sound?
If your Beltone Hearing Aid has no sound, first ensure that the hearing aid is switched on. Next, check if there is a battery in the hearing aid, and if not, insert a new battery. If there is a battery, verify that it is still good and replace it with a new one if necessary. Lastly, if your ear is full of wax, visit your physician.
How to stop my Beltone Rely RLY4CIC-W-LP Hearing Aid battery from draining so quickly?
If the battery of your Beltone Hearing Aid drains very quickly, ensure you switch off your hearing aid when not in use, such as during the night. Also, check the date on the battery pack to ensure the battery is not old.
Why is my Beltone Rely RLY4CIC-W-LP Hearing Aid whistling?
Feedback, or whistling, in your Beltone Hearing Aid can occur for several reasons. Ensure the hearing aid is correctly inserted. If the volume is too high, try reducing it. Also, make sure you are not holding anything too close to the hearing aid, such as a hat or telephone receiver; create more space between the hearing aid and the object. Finally, if earwax is the problem, you should visit your physician.
Why is the sound distorted on my Beltone Rely RLY4CIC-W-LP?
If the sound from your Beltone Hearing Aid is distorted or weak, the battery may be dead. Replace it with a new one. Alternatively, the battery might be dirty; clean it or replace it. If your hearing aid has gotten moist, use a desiccant (drying kit).
General| Type | CIC |
|---|---|
| Channels | 16 |
| Wireless Connectivity | Yes |
| Feedback Management | Yes |
| Noise Reduction | Yes |
| Directional Microphones | Yes |
| Bluetooth | Yes |
| Rechargeable | No |
| Programs | 4 |
| Telecoil | Yes |
| Water Resistance | IP68 |
| Battery Life | Up to 7 days |
To Next Page