Beltone Amaze BER13 - User Manual

Questions and Answers

J
John MoodyAug 8, 2025
What to do if my Beltone Hearing Aid has no sound?
- C
  Christine RhodesAug 8, 2025
  If your Beltone Hearing Aid has no sound, first ensure that the hearing aid is turned on. If it is on, check if it is in telecoil mode and switch to the microphone program. Verify that there is a battery in the hearing aid and that the battery is still good; replace it if needed. If the plastic tube, earmold, or dome is clogged or broken, consult your hearing care professional. Finally, if your ear is full of wax, visit your physician.
D
davislaurenAug 13, 2025
Why does my Beltone Amaze BER13 Hearing Aid whistle?
- S
  Shelley GuzmanAug 13, 2025
  If you are experiencing feedback or whistling with your Beltone Hearing Aid, first, make sure your earmold or dome is correctly inserted. If not, re-insert it. Also, check if the volume is too loud and reduce it if necessary. Ensure that you are not holding any objects close to the hearing aid. If your ear is full of wax, visit your physician.
T
Timothy EricksonAug 17, 2025
How to fix distorted sound in Beltone Hearing Aid?
- C
  Christopher StewartAug 17, 2025
  If the sound from your Beltone Hearing Aid is distorted, spluttering, or weak, the battery may be dead or dirty. Replace it with a new one or clean it. If the plastic tube or earmold is clogged or broken, consult your hearing care professional. If your hearing aid got moist, use a desiccant (drying kit).
D
Denise NorrisAug 21, 2025
Why does the battery of my Beltone Hearing Aid drain so fast?
- S
  Steven BrownAug 21, 2025
  If the battery of your Beltone Hearing Aid drains very quickly, make sure you always turn off your hearing aid when you are not using it. Also, check the date on the battery package to ensure the battery is not old.
J
Jennifer EstradaAug 25, 2025
Why does my Beltone Amaze BER13 have feedback or whistling?
- C
  Crystal CochranAug 26, 2025
  Feedback or whistling in your Beltone Hearing Aid can occur due to several reasons: * The earmold or dome may not be inserted correctly. Try reinserting it. * The volume might be too loud; try reducing the volume. * An object might be too close to the hearing aid. Create more space between the hearing aid and the object. * Your ear may be full of wax; in this case, visit your physician. * The receiver wire may be broken, or the earmold may be clogged. If this is the case, consider replacing it or visiting your hearing care professional.
T
timothy16Aug 30, 2025
Why is the sound distorted, sputtering, or weak in my Beltone Amaze BER13 Hearing Aid?
- J
  jessicadavisAug 30, 2025
  Distorted, sputtering, or weak sound in your Beltone Hearing Aid may be due to: * A dead battery. Replace it with a new one. * A dirty battery. Clean it, or replace it with a new one. * Moisture in the hearing aid. Use a desiccant. For a broken receiver wire or clogged earmold, visit your hearing care professional.
B
blackburnchristinaSep 3, 2025
How to prevent my Beltone Amaze BER13 Hearing Aid battery from draining quickly?
- H
  Henry OchoaSep 3, 2025
  To prevent your Beltone Hearing Aid battery from draining quickly: * Always switch off your hearing aid when not in use, such as during the night. * Check the date on the battery packaging to ensure the battery is not old.

Beltone Amaze BER13 Specifications

General

Category	Hearing Aid
Manufacturer	Beltone
Model	Amaze BER13
Wireless Connectivity	Yes
Bluetooth Connectivity	Yes
Water Resistance	IP68
Feedback Cancellation	Yes
Noise Reduction	Yes
Directional Microphones	Yes
Tinnitus Masking	Yes
Volume Control	Yes
Telecoil	Yes
Type	Behind-the-ear (BTE)
Battery Type	13
Bluetooth Compatibility	iOS and Android
Technology Level	Advanced