Beltone TST1764-DRW - User Manual

Questions and Answers

R
robert62Aug 12, 2025
What to do if my Beltone Hearing Aid has no sound?
- H
  huffvanessaAug 12, 2025
  If your Beltone Hearing Aid has no sound, first ensure that it is switched on. If it's on, check if it's in telecoil mode and switch it to the microphone program. Make sure there is a battery in the hearing aid, and if so, replace it with a new one to ensure it's not dead. If these steps don't resolve the issue, consult your hearing care practitioner, or visit your physician if your ear is full of wax.
D
Danny HillAug 19, 2025
Why does my Beltone Hearing Aid battery drain so quickly?
- G
  gdicksonAug 19, 2025
  A Beltone hearing aid battery might drain quickly if the hearing aid is left on for extended periods; always switch it off when not in use. Also, check the battery's expiration date on the packaging to ensure it is not old.
G
George DunnAug 27, 2025
Why is my Beltone Hearing Aid whistling?
- E
  Edward HernandezAug 27, 2025
  Whistling, or feedback, can occur for several reasons. Ensure your earmold or dome is correctly inserted; if not, reinsert it. If the volume is too high, reduce it. Check if an object is too close to the hearing aid and move it away. If your ear is full of wax, visit your physician. A clogged or broken plastic tube or earmold can also cause this issue; replace it or visit your hearing care professional.
V
victor64Sep 3, 2025
How to fix distorted sound in Beltone TST1764-DRW?
- C
  Christine MccormickSep 3, 2025
  Distorted, spluttering, or weak sound in your Beltone hearing aid can often be resolved by replacing the battery with a new one, especially if the current battery is dead or dirty—try cleaning it first. If moisture has affected the hearing aid, use a desiccant. If the problem persists, consult your hearing care professional.