Beltronics V995 - Quick Reference Card Programming Details; Programming Options and Functions

Table of Contents
Quick Reference Guide 4-5
Installation 6-7
• Power Connection 6
• Mounting Location 6
• Windshield Mount 7
Controls and Features 8-10
• Power and Volume Control 8
• Power-on indication 8
• Voice 8
• AutoMute 8
• Mute 8
• Highway / City Button 9
• Brightness and Dark Mode 9
• Audible Alerts 10
• Power Connector 10
• Signal Strength Meter 10
Programming 11-14
• How to use Programming 11
• Example of Programming 11
• Overview of Programming 12
• Details of Programming 13-14
Technical Details 15-21
• Specifications 15
• Interpreting Alerts 16-17
• How Radar Works 18
• How “POP” Works 18
• How Laser Works 19
• How Safety Radar Works 20-21
Service 22-28
• Troubleshooting 22-23
• Service 24
• Warranty and Accessories 25
• Registration 27-28
32
Quick Reference Card
BELTRONICS V940 Quick Reference Card
* Factory Default Settings
H Remove card along perforations H
H Remove card along perforations H
Press the RVW button
to go from one category
to the next
PILOT
(Power-on indication)
VOICE
POWER-ON SEQUENCE
AUTOMUTE
CITY MODE SENSITIVITY
BANDS
Pilot HWY
Pilot H
Voice ON
Voice OFF
PwrOn STD
PwrOn FST
aMute ON
aMute OFF
City STD
City LoX
Bands DFT
Bands MOD
POP ON
or OFF (default is off)
SWS ON or OFF (default is off)
Press the CHG button
to change your setting
within a category
*Full word: Highway or City
Letter: H or C
*Voice alerts on
Voice alerts off
*Standard power-on sequence
Fast power-on sequence
*AutoMute on
AutoMute off
*Standard City mode sensitivity
Low X band sensitivity in City Mode
*Factory default settings
Factory default settings modified
Turn bands “ON” or “OFF” by
pressing the VOLUME/MUTE button