Beltronics Vector 985 - Selectable Features

Selectable Features
There are a total of 16 Driver Selectable Features which
may be selected depending upon your driving
environment and preference.
1. X Band
(10.525 GHz) ON/OFF
2. K Band (24.150 GHz) ON/OFF
3. Super Wideband Ka (33.4 – 36.0 GHz)ON/OFF
4. AccuSweep
™
(Ka Narrow detection)
5. AutoMute ON or OFF
6. Radar/Laser Digital Voice Prompts ON/OFF
7. Safety Warning System
®
ON/OFF
8. Safety Warning System
®
Digital VOICE or TONE
9. Audio/Visual Scroll Rate FAST or SLOW
10. Inv e r ted Display Option ON/OFF
11 . AutoScan
™
(accessed using CTY Button)
12 . Normal Mode
(Note: 12-16 accessed using PWR Button)
13 . Modifications Mode
14 . Q -Start
15 .Tech Mode
16 .Voltage Meter Mode
Description of Selectable Features
Features 1-3
X/K/Super Wideband Ka Band ON or OFF
Select “
XX oo nn //XX oo ff ff
”
,,
“
KK oo nn //KK oo ff ff
” or
“
KKaa SSWWIIDDEE oo nn //oo ff ff
” depending upon your driving
environment and selectivity requirements.
This mode is especially useful where falsing may occur
and disabling the offending band may be an option .
Factory setting is ON for all three bands.
Note:Super Wideband Ka is ON when the check mark
symbol is FLASHING, Super Wideband Ka is OFF when
the underscore line is flashing.
11
k