Need help?Do you have a question about the Bematech I-150 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Wavelength | 645 nm |
| Sensor type | LED |
| Scanner type | 1D |
| Read rate (max) | 280 reads/s |
| Yaw reading angle | -25 - 25 ° |
| Tilt reading angle | -55 - 55 ° |
| Pitch reading angle | -75 - 75 ° |
| Linear (1D) barcodes supported | Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, Industrial 2 of 5, Interleaved 2 of 5, MSI, Plessey, U.P.C. |
| Optical sensor resolution (W x H) | 640 x 480 pixels |
| 2D (matrix & stacked) barcodes supported | Not supported |
| Cable length | 1.4 m |
| Standard interfaces | USB |
| Connectivity technology | Wired |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 20 - 50 °C |
| Operating relative humidity (H-H) | 5 - 98 % |
| Certification | EMC CE & FCC DOC, VCCI IEC 62471 |
| Product color | Black |
| Housing material | Plastic |
| International Protection (IP) code | IP52 |
| Input voltage | 5 V |
| Power consumption | 140 mA |
Weight and Dimensions| Depth | 121.6 mm |
|---|---|
| Width | 66.3 mm |
| Height | 162.8 mm |
| Weight | 200 g |
Options to set scanner settings to default or read its current version information.
Configure the scanner's keyboard language output to match different regional layouts.
Define the character(s) to be appended to scanned data, such as CR or Tab.
Choose the operational mode for the scanner, including trigger and presentation modes.
To Next Page
