Need help?Do you have a question about the Bematech I-150 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Wavelength | 645 nm |
| Sensor type | LED |
| Scanner type | 1D |
| Read rate (max) | 280 reads/s |
| Yaw reading angle | -25 - 25 ° |
| Tilt reading angle | -55 - 55 ° |
| Pitch reading angle | -75 - 75 ° |
| Linear (1D) barcodes supported | Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, Industrial 2 of 5, Interleaved 2 of 5, MSI, Plessey, U.P.C. |
| Optical sensor resolution (W x H) | 640 x 480 pixels |
| 2D (matrix & stacked) barcodes supported | Not supported |
| Cable length | 1.4 m |
| Standard interfaces | USB |
| Connectivity technology | Wired |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 20 - 50 °C |
| Operating relative humidity (H-H) | 5 - 98 % |
| Certification | EMC CE & FCC DOC, VCCI IEC 62471 |
| Product color | Black |
| Housing material | Plastic |
| International Protection (IP) code | IP52 |
| Input voltage | 5 V |
| Power consumption | 140 mA |
Weight and Dimensions| Depth | 121.6 mm |
|---|---|
| Width | 66.3 mm |
| Height | 162.8 mm |
| Weight | 200 g |
To Next Page
