Benchmark 1347-001 - Understanding Safety Symbols; Symbol Definitions and Certifications

13
SYMBOLS
WARNING: Some of the following symbols may appear on the mitre saw. Study
these symbols and learn their meaning. Proper interpretation of these symbols will
V Volts
n
~
Three-phase alternating
current with neutral
A Amperes
Read all documentation
Hz Hertz
Direct current
W Watts
n
o
No load speed
kW Kilowatts
Alternating or direct current
Microfarads Class II Construction
L Litres
Splash-proof construction
kg Kilograms
Watertight construction
H Hours
Protective grounding at
terminal, Class I tools
N/cm²
Newtons per square
centimetre
.../min
Revolutions or reciprocations
per minute
Pa Pascals
Diameter
OPM Oscillation per minute 0
Min Minutes
Directional Arrow
S Seconds
Warning symbol
~
or AC Alternating current Wear eye protection
~
Three-phase
alternating current
This symbol designates that this tool os listed with U.S. repuirements by
MET Laboratories, Inc.
UL 62841-1, UL 62841-3-9
CAN/CSA-C22.2 No. 62841-1, CAN/CSA-C22.2 No. 62841-3-9.