11
2. RELEASE THE TRIGGER AND TURN THE SWITCH TO “OFF/0” POSITION
Turn o the water supply tap.
NOTE: When not in use, make sure Lock-o switch is in “Lock” position.
UNLOCK LOCK
3. SELECT THE RIGHT NOZZLES
Attach nozzle into the end of the lance by pressing selected nozzle into place, it will
make a click sound when firmly in place. To remove nozzle, pull back on the collar
on the lance and pull out the nozzle.
0° nozzle-red : This type of nozzle produces a vertical, stratified, high-pressure jet
for surface cleaning with particularly severe dirt.
25° nozzle-green, 40° nozzle -white: These types of nozzles can produce the
corresponding angle fan-shaped high-pressure jet, cleaning power, for large-scale
dirt surface cleaning.
Soap nozzle - black: This nozzle is used to apply chemicals or cleaning solutions. It
has the least power steam.
Turbo nozzle features a 0° pencil jet which rotates 360° for maximum dirt cutting
action, eectively increasing cleaning performance up to 50%, this nozzle combines
the clean ing performance of a 0° pencil jet with the surface coverage of a wide
angle nozzle.
WARNING! Remember to change the nozzle when the gun is o, to ensure that
they do not accidentally eject with force during removal.
PUSH IN THE NOZZLE PULL OUT THE NOZZLE
0° nozzle - RED
Soap nozzle - BLACK Turbo nozzle
25° nozzle - GREEN 40° nozzle - WHITE
To Next Page
Loading...
