5044-035
ELECTRIC PRESSURE WASHER 2100 PSI
10
6. Attach the garden hose - Connect one end of the home garden hose (not
supplied) to the water inlet connector and another end to water source.
WARNING The appliance is INTENDED to be used at a temperature above
32°F (0°C).
7. Connect to the power supply, plug the pressure washer into the power outlet.
OPERATION
TO WASH WITH WATER
1. TURN ON THE WATER SUPPLY TAP
Connect the washer to the power supply and turn the switch to “ON/I” position.
Then press trigger.
NOTE: Before pressing trigger, make sure lock-o switch is in “unlock” position.
WARNING Do not start the machine without connecting and turning on the
water supply because it may cause damage to high pressure seals and reduce the
service life of the pump.
To Next Page
Loading...
