EasyManua.ls Logo

Benchmark 5044-035 - Water Connection and Usage Safety

Benchmark 5044-035
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
SYMBOL MEANING
CAUTION - WATER CONNECTIONS
For use with fresh and clean water only. Do not use this
product with other liquids.
The water supply system must be protected against back flow.
Never use this product with water contaminated with solvents
(e.g. paint thinners, gasoline, oil, etc.).
Always prevent debris from being drawn into the product by
using a clean water source and an additional water filter, if
required.
If this device is connected to a potable water system, the
system must be protected against back flow.
Suitable water temperature: from 41
°
F to 104
°
F (5
°
C to 40
°
C)
CAUTION - USE
Learn how to stop the device and release the pressure quickly.
Familiarize yourself with the controls.
Keep all connections dry and o the ground.
Avoid accidental starts. Shut power OFF before connecting or
disconnecting the power cord.
Never carry the pressure washer by the cord.
Do not pull on the cord to disconnect from the outlet.
To allow for free air circulation, the pressure washer should not
be covered during operation.
Do not operate the product when tired or under the influence
of alcohol or drugs.
Do not stand on unstable surfaces. Stand with both feet
balanced at all times.
Keep the operating area clear of people and pets.
IMPORTANT - MAINTENANCE
Any assembly, use or maintenance of the product must be
carried out by adults only.
Follow the maintenance instructions specified in the manual.
If replacement of the power plug or cord is needed, use only
identical replacement parts.
Repairing and replacing parts should be done by a certified
technician.
Before servicing, cleaning or removal of any parts, shut the
power OFF and release the pressure.

Related product manuals