EasyManua.ls Logo

Benchmark 5073-039 - Advanced Trimming Techniques; Trimming in Various Conditions; Trimming Motion and Speed Control; Cutting Height and Tall Grass Handling

Benchmark 5073-039
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5073-039
20V MAX BRUSHLESS GRASS TRIMMER
20
WARNING:
For safety reasons, the operator must read the sections of this Owner’s Manual
entitled GENERAL SAFETY WARNINGS, ELECTRIC GARDENING TOOL SAFETY,
SPECIFIC SAFETY RULES, BATTERY & CHARGER SAFETY, BATTERY PACK
RECYCLING and SYMBOLS before using this grass trimmer.
Verify the following every time the grass trimmer is used:
1. Safety glasses or goggles, hearing protection device, hearing protection
and all required safety clothing are being worn.
2. Appropriate length of trimming line is exposed beyond the trimmer
line housing.
3. The area to be trimmed is cleared of all dangerous debris.
4. Bystanders are at least 50' (15 m) away from the trimming area.
Failure to observe these safety rules will signicantly increase the risk of injury.
GENERAL TRIMMING GUIDELINES
WARNING: Be extremely careful when cutting around hard objects such
as rock, gravel, fence posts etc. that can be contacted by the line or the spool
housing. Contacting these items with the line or spool housing may cause pieces
of the trimmer line and debris to be violently thrown. It may also cause the line to
become entangled and damage both the line and the spool housing.
When trimming, do not feed the line into the work area too quickly and crowd the
line. Only the tip of the line does the cutting. Feeding the line into the work area
too quickly will reduce the head speed, slow the cutting action and overload the
motor. It will also reduce the battery pack capacity before requiring recharging.
FIG. 20
Tab Slot
5073-039f EnProdManual P.indd 205073-039f EnProdManual P.indd 20 2020-12-17 1:59 PM2020-12-17 1:59 PM

Related product manuals