10
ATTACHING THE HANDLE TO THE MOWER BASE (Fig. 4)
Align holes (1) at the lower end of each handle arm with posts (2) extending from
the mower body side plates.
Slide lower ends of handle arms onto posts.
GRASS BASKET ASSEMBLY (Fig. 5-7)
• Place the hooks on the rear of the grass basket onto the roller shaft. Secure the
basket to the lower handle using the strap supplied. (Fig. 6).
• Adjust strap for proper height so the basket does not drag on the ground while
mowing or transporting. (Fig. 7).
Fig. 4
Fig. 5
Fig.6
Fig. 7
5122-002
18" PUSH REEL LAWN MOWER
To Next Page
Loading...
