39
GRASS CUTTING
To start cutting:
1. Move the Throttle Lever (9) to FAST.
2. Raise the Height Adjustment Lever (2) as high as possible (position 7).
3. Use Blade Start / Stop Knob (12) and engage the blades.
4. Start moving forwards on the grass by utilizing the Drive Engagement (15) very
slowly and with utmost caution, as already described.
5. Regulate the cutting height and speed while considering the conditions of the
height, density, and dampness of the grass.
When cutting on sloping ground, reduce your speed to ensure safe
conditions.
1. Whatever the conditions, always reduce the speed if you notice a drop in engine
speed.
2. If you travel too fast compared to the amount of grass being cut, you will not be
able to mow the grass well.
3. Disengage the blades and raise the cutting deck as high as possible whenever
you need to get past an obstacle.
This machine has not been approved for mowing when driving in
reverse.
1. The blades will stop when the machine is placed in reverse by pressing the Drive
Engagement (15) to reverse R.
2. Press the Reverse Mode Operation Button (RMO) (11) (right of the steering wheel) to
override and keep the blades rotating when the mower is moving in reverse R.
OPERATING TIMES AND DAYS
The time of operation of the lawnmower could be regulated by specific national or
local laws. Contract the local authorities for more information.
END OF MOWING
When you have nished mowing:
1. Use the Blade Start / Stop Knob (12) and disengage the blades
2. Use the Throttle Lever (9) to lower the engine speed.
3. Raise the Height Adjustment Lever (2) as high as possible (position 7).
4. Drive the machine to your destination.
To Next Page
Loading...
