32
BG SERIES
4.2.3 ELECTRIC START
1. Choose your fuel source by following section 4.2.1
2. If the engine is cold push the choke lever to the START/CLOSED position. The
choke is used to provide the proper air-fuel mixture when the engine is cold.
You can find the choke lever behind the air filter on the back side of your
generator.
3. Turn the power switch to the ON position.
4. Press and hold the START button for 1 second, or until the generator fires,
then release it.
5. When the engine warms up push the choke to the RUN/OPEN position.
6. Connect the devices to the front panel.
1 2 3
4
5
6
RUN
START
To Next Page
Loading...
