Benchmark BG4650E - Changing the Oil

40
BG SERIES
Replacement parts and accessories
The parts making up the emission control system in your product’s engine have
been specifically approved and certified by the regulatory agencies. You can trust
that the replacement parts supplied by customer service have been manufactured
to the same production standard as the original parts. The use of replacement
parts or accessories which are not designed for your engine – may negatively
aect the engine emission performance. Therefore only use replacements parts
and accessories from a qualified service centre to guarantee that the replacement
products will not adversely aect emission performance.
Replacement parts other than those from an authorized service centre will void the
warranty.
6.3 CHANGING THE OIL
WARNING!
Used motor oil can cause skin irritations if left in long-term contact with
skin. Thoroughly wash o used oil from hands as soon as possible with
soap and water.
Do not dispose of used oil in drains or on soil. Local service shops provide
environmentally-friendly disposal methods.
Drain the oil rapidly and completely on a level surface while the engine is still warm.
1. Stop the engine and remove oil dipstick.
2. Place a pan under the engine.
3. Remove the oil drain bolt and allow the oil to completely drain into the pan.
Oil Drain Bolt
Oil Drain Pan