Why does my Benchmark Pressure Washer engine lack power and vibrate excessively?
If your Benchmark Pressure Washer engine lacks power and vibrates excessively, check the following: * Ensure the choke is not in the Start position; move it to the Run position. * The air filter may be dirty; clean the air filter.
What causes water to leak at the spray wand connection or pump of my Benchmark Pressure Washer?
If water is leaking at the spray wand connection or pump of your Benchmark Pressure Washer, consider the following: * Loose connections: Tighten them. * Worn spray wand o-ring: Replace it. * Piston packings worn: Contact technical support. * Worn pump o-ring: Contact technical support. * Pump head or tubes damaged from freezing: Contact technical support.
What to do if my Benchmark Pressure Washer engine loses power when load is added?
To address the issue of your Benchmark Pressure Washer engine losing power when a load is added, move the throttle to full power (rabbit icon) because the engine speed may be too low.
General| Brand | Benchmark |
|---|---|
| Model | BW Series |
| Category | Pressure Washer |
| Language | English |
To Next Page
