11Bend-Tech Dragon A150
Plasma Cutting Guide
Consumables
01
01
Consumables
Overview
Bend-Tech recommends reading the Hypertherm Operator Manual (or operator manual for
whatever brand plasma cutting machine is being used with the Dragon machine) and using
that can result from slag during the piercing process. Bend-Tech recommends using shielded
consumables with the Dragon A150 whenever possible.
Ensure plasma machine settings are correct for the type of cutting being performed.
Consumable life can vary depending on the type of cutting being performed, quality of air
supply, machine settings, type of material being cut and numerous other factors. It is important
to inspect consumables on a regular basis.
Consumables in Order of Assembly
Shield
Retaining Cap Electrode Swirl Ring
To Next Page
Loading...
