EasyManua.ls Logo

BENDIX GEN 4 GEN 5 ABS - Page 22

BENDIX GEN 4 GEN 5 ABS
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
61 005/000 Sensor air gap too large. Left Rear Sensor.
62 005/008 Air gap too large or sensor shorted.
63 005/010 Speed Sensor signal is noisy.
64 005/008 Wheel locked for too long during an ABS cycle.
65 005/008 High deceleration rate at wheel site or sensor shorted. Left Rear Sensor.
66 005/012 Sensor shorted low or high or sensor open. (continued).
67 005/012 Internal error at the sensor port of the ECU.
68 005/002 Sensor in the wrong location for the system configuration.
71 006/000 Sensor air gap too large. Right Rear Sensor.
72 006/008 Air gap too large or sensor shorted.
73 006/010 Speed Sensor signal is noisy.
74 006/008 Wheel locked too long during an ABS cycle.
75 006/008 High deceleration rate at wheel site or sensor shorted.
76 006/012 Sensor shorted low or high or sensor open.
77 006/012 Internal error at the sensor port of the ECU.
78 006/002 Sensor in the wrong location for the system configuration.
81 007/003 Short circuit from the release solenoid to voltage. Left Steer Axle PMV.
82 007/004 Short circuit from the release solenoid to ground.
83 007/005 Open circuit at the release solenoid.
84 007/005 Open circuit on the common line to the valve.
85 007/003 Short circuit from the hold solenoid to voltage.
86 007/004 Short circuit from the hold solenoid to ground.
87 007/005 Open circuit at the hold solenoid.
88 007/002 System configuration is incorrect.
810 151/014 Inter-axle differential control circuit shorted high. IAD Circuit.
810 151/014 Inter-axle differential control circuit shorted low or open.
91 008/003 Short circuit from the release solenoid to voltage. Right Steer Axle PMV.
92 008/004 Short circuit from the release solenoid to ground.
93 008/005 Open circuit at the release solenoid.
94 008/005 Open circuit on the common line to the valve.
95 008/003 Short circuit from the hold solenoid to voltage.
96 008/004 Short circuit from the hold solenoid to ground.
97 008/005 Open circuit at the hold solenoid.
98 008/002 System configuration is incorrect.
Blink Codes
1st. 2nd.
Description
Location
MID 136
SID/FMI

Related product manuals