EasyManua.ls Logo

BENDIX GSBC - Dash Display Indicators and Operation

BENDIX GSBC
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BW8207 Bendix Global Scalable Brake Control (GSBC) System Operators Manual 14
GSBC DISPLAY INDICATOR LAMPS AND OPERATION  NORMAL
Mode
EBS
Lamp
ABS
Lamp
ESP
Lamp
ATC
Lamp
TABS
Lamp
Description
At Vehicle Startup with Vehicle not Moving
Ignition on - startup
Trailer
with
ABS
On for
approx.
three (3)
seconds*
On for
approx.
three (3)
seconds*
On for
approx.
three (3)
seconds*
On for
approx.
three (3)
seconds*
On for
approx.
three (3)
seconds*
*If any of the described
lamp behaviors do not
occur, or, if the lamp remains
on continuously during
operation, have the vehicle
serviced by a qualied
technicianal as soon as
possible to restore full system
functionality. Check with your
OEM for variations on dash
lamp timing and duration as
compared to Bendix default
lamp timings.
All lamp timings are
approximate.
No
Trailer/
Trailer
without
ABS
On for
approx.
three (3)
seconds*
On for
approx.
three (3)
seconds*
On for
approx.
three (3)
seconds*
On for
approx.
three (3)
seconds*
Lamp o*
Three (3)
seconds after
ignition (with
no Diagnostic
Trouble Codes)
Lamp o* Lamp o* Lamp o* Lamp o* Lamp o*
Vehicle in Normal Operation with Vehicle Moving
EBS Operation Lamp o Lamp o Lamp o Lamp o
EBS functions are active all the
time - the EBS Warning Lamp
will not illuminate except for
system faults. (Refer to the EBS
section on page 11.)
ABS Activation Lamp o Lamp o Lamp o Lamp o
ABS activates when wheel
slip is sensed during braking.
(Refer to the ABS section on
page 11.)
ESP Activation Lamp o Lamp o
Lamp
blinks
rapidly
Lamp o
ESP activates when the
system senses a possible loss
of vehicle stability. (Refer to
the ESP section on page 13.)
ATC Activation Lamp o Lamp o Lamp o Lamp o
ATC activates when drive
wheels are spinning at low
speeds. (Refer to the ATC
section on page 13.)
Vehicle in Special Operation
ATC
Mode
Switch
Setting
ATC
Disable
Lamp o Lamp o Lamp o
Lamp
Solid
The Mud/Snow mode is
an optional ATC feature
operated by a dash-mounted
switch. This function allows
greater engine power and
more wheel spin during ATC
operation.
Normal
- During
ATC
event
Lamp o Lamp o Lamp o Lamp o
Mud/
Snow -
During
ATC
Event
Lamp o Lamp o Lamp o Lamp o
NOTE: These dash indicator lamps and their operation are for representation purposes only.
The OEM may have additional dash indicators for ATC and ABS activation.
Check with the OEM for actual display indications and operation.
BRAKE