14
The Active Cruise with Braking (ACB) Feature
NOTE: Whenever the cruise control is set, the Active Cruise with Braking
feature is also set. You can not engage cruise control without also using all
the features of the Bendix
®
Wingman
®
Fusion
™
system.
Setting Cruise Control
Activating the Active Cruise with Braking feature is as easy as using ordinary
cruise control.
Examples of cruise control switches
First, switch on the cruise control. Accelerate your vehicle to the cruise control
speed you wish to maintain, then press the cruise control set switch. The
Active Cruise with Braking feature is now ready and will help you maintain a
set following distance.
Once the cruise control speed is set, a green
cruise‑enabled icon (or similar) will illuminate
on the instrument panel. If the cruise‑enabled
(or similar) icon does not illuminate, the cruise
control is not functioning normally. Please refer
to your vehicle Operator’s Manual to double-
check the location of the icon and for further
troubleshooting information.
Some vehicle manufacturers use the instrument
cluster to momentarily show the cruise control
set speed to the driver.
Where the Bendix
®
Driver Interface Unit (DIU
™
) display is used, a text message
will provide the set speed information.
You can switch the Active Cruise with Braking feature off manually by either
stepping on the brake, or switching OFF the cruise control.
Example of Driver
Interface Unit (DIU)
detected forward
Vehicle display
To Next Page
Loading...
Need help?
General
