Need help?Do you have a question about the BENDIXKing KNS 80 and is the answer not in the manual?
Power| power requirements | 11 to 33 VDC, 25 watts |
|---|---|
| current at 13.75 VDC | 1.8 A |
| current at 27.50 VDC | .9 A |
Transmitter Specifications| transmitter power output | 50 W min. (100 W typical) |
|---|---|
| sensitivity | -82 dbm min. (-85 typical) |
| frequency range | 200 channels, 108.00 to 117.95 |
Weight and Dimensions| length | 11.19' (28.4 cm) |
|---|---|
| height | 3.0" (7.6 cm) |
| width | 6.31 " (16.0 cm) |
| weight | 6 lbs. (2.7 kg) |
Identifies and describes the purpose of each control button and switch on the KNS 80.
Explains the various displays, modes, and flags on the KNS 80 unit.
Defines waypoints and explains the geometry used in RNAV calculations.
Details linear and angular crosstrack deviation and their meanings.
Factors affecting along-track distance smoothness in RNAV modes.
Visual representation of errors based on offset distance and range.
Steps to turn on the unit and understand initial status and battery function.
Procedure for entering frequency, radial, and distance for Waypoint 1.
Procedure for entering frequency, radial, and distance for Waypoint 2.
Steps for initiating flight to the first waypoint after data entry.
Managing transition between waypoints during flight.
Procedure for navigating directly to a VOR/DME station.
How to retain DME while tuning other frequencies like ILS.
Utilizing the RNV/APR mode for runway approach navigation.
To Next Page