BENDIXKing KY 196A User Manual

Overview of manual content, including physical, mechanical, and electrical characteristics.

Details electrical sections, power differences, and operational capabilities like memory channels.

Lists TSO compliance, environmental data, and physical dimensions of the transceivers.

Lists specific part numbers and flavors of KY 196A and KY 197A transceivers.

Outlines Aircraft Radio Station License and operator permit requirements for transmitter use.

Suggestions and factors to consider before installing for optimal performance.

Instructions for unpacking, inspection, and handling shipping claims.

Discusses installation conforming to standards, cable fabrication, and connector requirements.

Details mounting procedures, spacing, and securing the unit in the rack.

Specifies antenna requirements, mounting guidelines, and isolation recommendations.

Guides assembly of contact terminals, insertion, and extraction.

Recommends operational flight tests and performance verification with ground stations.

Refers to pilot guides for controls and shows the control layout.

Explains powering on, overriding squelch, and setting audio levels. Includes caution.

Details Frequency, Channel, Program, Program Secure, and Direct Tune modes.

Explains remote transfer button function, similar to the front panel.

Details using a remote button to increment channels.

Shows selection of display brightness control modes (Max Bright, Photocell, Dimmer Bus).

Guides entering Display Adjust mode for brightness settings.

Lists environmental conditions and conducted tests as per RTCA DO-160B standards.