Need help?Do you have a question about the BENDIXKing KX 99 and is the answer not in the manual?
Operating Environment| frequency stability | 0.002% |
|---|---|
| operating temperature range | -20 to +55 Degrees C |
| channel spacing (Comm) | 25 KHz |
| channel spacing (Nav) | 50 KHz |
Power| power requirements | 9.6 VDC |
|---|---|
| receive (squelched) | 70 mA |
| receive (full volume) | 200 mA |
| transmit | 1200 mA |
Receiver Specifications| frequency range | 108 to 136.975 MHz |
|---|---|
| weather frequency range | 161.50 to 163.275 MHz |
| selectivity | -6 dB at 5 KHz |
| sensitivity AM | 6 dB at 1 µV |
Audio and Output| audio output power | 500 mW into 8 Ohms |
|---|---|
| audio distortion | 15% |
| adjacent channel rejection (Comm) | -40 dB |
| adjacent channel rejection (Nav) | -60 dB |
Transmitter Specifications| transmitter power | 1.5 Watts |
|---|---|
| duty cycle | No damage continuously keyed |
| microphone | Internal Electret or External |
Weight and Dimensions| height | 8.0 inches |
|---|---|
| width | 2.6 inches |
| depth | 1.6 inches |
| weight | 1.75 lbs |
Step-by-step guide for setting up and using the KX 99 for radio communication.
Introduction to VOR frequencies and navigation modes on the KX 99.
Understanding the Course Deviation Indicator and basic navigation display.
Procedures for setting desired courses using the OBS function.
Automatically centering the CDI based on TO or FROM VOR signal indications.
Instructions for storing frequencies into memory locations 1 through 9.
How to recall stored frequencies from memory locations.
Setting up and using the KX 99 for transmitting and receiving on different frequencies.
Guidance on troubleshooting, contacting service, and shipping for repairs.
To Next Page