Need help?Do you have a question about the BENDIXKing KY 97A and is the answer not in the manual?
General overview of the transceiver's receiver, transmitter, control, and power supply sections.
Explains the basic circuit principles of the receiver, transmitter, and associated systems.
Detailed explanation of specific circuits within the receiver, including input, RF amplifier, mixer, and filters.
Covers tests, alignment, inspection, cleaning, repair, and troubleshooting procedures for the unit.
Lists the essential test equipment, including power supplies, signal generators, and meters.
Defines the return-to-service performance test for control functions and receiver operation.
Provides step-by-step instructions for aligning the VCO, transmitter, and receiver systems.
Details visual inspection, cleaning procedures, and contact maintenance for unit overhaul.
Explains the structure of the Illustrated Parts List (IPL) and part identification.
Describes columns and abbreviations used in the Bill of Material (BOM) and parts lists.
Details unit software configuration, part number series, and programmed device identification.
Comprehensive lists of assemblies and discrete components for the KY 96A and KY 97A transceivers.
Diagram illustrating the software and hardware configuration for the KY 96A unit.
Diagram detailing the software and hardware configuration for the KY 97A unit.
General| Frequency Range | 118.000 to 136.975 MHz |
|---|---|
| Channel Spacing | 25 kHz |
| Number of Channels | 760 |
| Power Output | 10 W |
| Transmitter Power | 10 W |
| Dimensions | 6.3 x 6.0 x 1.5 in (160 x 152 x 38 mm) |
| Modulation | AM |
| Type | VHF COM Transceiver |
| Operating Voltage | 13.75 VDC |
To Next Page