Quick Reference
KLX 135
B
GPS/COMM
These simplified operating instructions are only to familiarize you with the
KLX 135. For detailed operating instructions, please refer to the
KLX 135 Pilot's Guide P/N 006-08751-0000.
GPS
The two concentric knobs and
B
button on the right are used to control the GPS
functions of the KLX 135. The right inner knob can be pulled out, but for now it
should be pushed in.
When the cursor is off
, the right outer knob changes the page type (APT to VOR to
NDB, etc.) and the right inner knob changes the page number (APT 1 to APT 2).
When the cursor is on
, the right outer knob moves the cursor and the right inner knob
changes the data under the cursor.
To change a cyclic field:
1. Turn on the cursor (by pressing the
B
but-
ton) and place it over a cyclic field, which is
always preceded by a carat (>).
2. Press the
E
button to change the cyclic
field. One example is the NAV 1 page, which
can display a D-bar (Figure 1) or numerical
course deviation (Figure 2).
To display the Nearest Airport:
1. Press
C
then press
F
.
2. The waypoint page for the nearest airport will now be displayed on the screen.
The right inner knob (in the “pulled out” position), may be used in the normal
manner to scan the other nearest airports. With the right inner knob in the “in”
position, you may view all four airport pages for a specific airport.
To Next Page
Need help?
General