19
SECTION 10
(Operation Instructions)
OWNER/EMPLOYER RESPONSIBILITIES
The Owner/Employer:
• Shall ensure that lift operators are qualied and that they
are trained in the safe use and operation of the lift using
the manufacturer’s operating instructions; ALI/SM01-1, ALI
Lifting it Right safety manual; ALI/ST-90 ALI Safety Tips
card; ANSI/ALI ALOIM-2000, American National Standard
for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; ALI/WL Series, ALI Uniform
Warning Label Decals/Placards; and in the case of frame
engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick
Reference Guide for Frame Engaging Lifts.
• Shall establish procedures to periodically inspect the
lift in accordance with the lift manufacturer’s instructions
or ANSI/ALI ALOIM-2000, American National Standard
for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and The Employer shall
ensure that lift inspectors are qualied and that they are
adequately trained in the inspection of the lift.
• Shall establish procedures to periodically maintain the
lift in accordance with the lift manufacturer’s instructions
or ANSI/ALI ALOIM-2000, American National Standard
for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and The Employer shall
ensure that lift maintenance personnel are qualied and
that they are adequately trained in the maintenance of the
lift.
• Shall maintain the periodic inspection and maintenance
records recommended by the manufacturer or ANSI/ALI
ALOIM-2000, American National Standard for Automotive
Lifts-Safety Requirements for Operation, Inspection and
Maintenance.
• Shall display the lift manufacturer’s operating
instructions; ALI/SM 93-1, ALI Lifting It Right safety
manual; ALI/ST-90 ALI Safety Tips card; ANSI/ALI AL-
OIM-2000, American National Standard for Automotive
Lifts-Safety Requirements for Operation, Inspection and
Maintenance; and in the case of frame engaging lifts, ALI/
LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide
for Frame Engaging Lifts; in a conspicuous location in the
lift area convenient to the operator.
• Shall provide necessary lockout/tagout means for energy
sources per ANSI Z244.1-1982 (R1993), Safety
Requirements for the Lockout/Tagout of Energy Sources,
before beginning any lift repairs.
• Shall not modify the lift in any manner without the prior
written consent of the manufacturer.
To Next Page
Loading...