Need help?Do you have a question about the BENE LEVEL and is the answer not in the manual?
General| Brand | BENE |
|---|---|
| Model | LEVEL |
| Category | Indoor Furnishing |
| Language | English |
Fix the table legs (ends) to the base structure using the provided hardware.
Initial step for assembling the crank adjustment system for height.
Attach the cantilever leg assembly to the frame with screws.
Securely tighten all screws and attach decorative covers.
Assemble the two tables following the individual LEVEL assembly steps.
Initially slide the column cover about 5 cm forward.
Combine the column cover and the leg assembly for the twin setup.
Step 1: Install the middle adapter for T-Panel Multi.
Step 3: Fasten the adapter to the T-Panel Multi with screws.
Step 1: Prepare the T-Panel Extend mounting points.
Step 7: Adjust and secure the T-Panel Extend components.
Step 1: Attach the CPU holder bracket to the table leg.
Step 1: Raise the tabletop until it clicks into place.
Step 2: Lower the tabletop to its lowest position.
Step 3: Raise the tabletop to the desired height setting.
To Next Page
