3 - 2
Instrument and control functions
EN
3
To lock the steering:
1) Turn the handlebar completely to the
left.
2) Insert the key in the ignition.
3) Press and turn the key anticlockwise, in
the “ “ position to lock the steering.
4) Remove the key.
NOTE
To make it easier to engage the steering
lock, move the handlebar slightly while
turning the key.
NOTE
After locking, try turning the handlebar
slightly to make sure that the steering is
actually locked.
To unlock the steering:
1) Insert the key in the ignition.
2) Turn the key clockwise.
3) Make sure the steering block is not en-
gaged before starting the engine and set-
ting out.
To Next Page
Loading...
Need help?
General
