Benelli TRK249 - Spark Plug; Catalytic Converter

BJ250-18
35
3. Install the oil lter with the special tool and oil drain bolt.
4. Fill the engine with qualied engine oil
5. Make the engine runs in idling for several minutes and turn o.
6. Make sure the oil reaches the upper limit mark without any oil leakage.
SPARK PLUG
Clear away carbon deposit on the spark plug with small metal wire brush or spark plug cleaner during inspection
period noted in the maintenance schedule. Readjust the electrode gap of spark plug with feeler gauge and keep the
gap between 0.7～0.8mm.
Replace the sparking plug for each 6000km.
Type of Spark Plug: CR8E
CATALYTIC CONVERTER (IF EQUIPPED)
In order to meet the requirements of environmental emission, the muer of the motorcycle is
equipped with catalytic converter.
INSPECTION& MAINTENANCE
Do not Screw the spark plug too tight to avoid damaging the threads of cylinder cover.
Don't let the foreign objects fall into the engine through spark plug hole during
dismounting.
GAP