Need help?Do you have a question about the Beninca BILL 30M and is the answer not in the manual?
General| Power Supply | 230V AC |
|---|---|
| Motor Power | 280W |
| Opening Speed | 12 m/min |
| Protection Rating | IP44 |
| Operating Temperature | -20°C to +50°C |
| Power | 280W |
| Protection Level | IP44 |
| Voltage | 230 V |
Mandatory extra stroke of 10mm (closing) and 15mm (opening) to prevent rod hitting tube.
Gate leaf must be equipped with ground mechanical stoppers (ref. A and B).
Braking in both opening and closing operations is mandatory.
Minimum ground height is 200mm. Electric lock needed for gates over 2.5m or solid gates over 2.0m.
List of components used in the electrical wiring diagram.
Separation of power and auxiliary cables; 115 Vac for BILL30MA model.
Product must be used only as intended; incorrect use can damage the product and cause injuries.
Installation must be performed by qualified personnel in compliance with regulations.
Ensure omnipolar switch, differential switch, and overcurrent protection are installed.
Details BILL30M/MA models, SX/DX versions, and pre-installation steps.
Mandatory ground stoppers, operating limits, and gate strength/stiffness.
Guide for system installation, actuator positioning, and wire connections.
Warranty conditions and electrical safety precautions for installation.
Do not stand in movement area, keep children away, call technician for faults.
Procedure for manual operation during power failure or faults using release key and handle.
Monthly check of emergency manual release and periodic check of safety devices.
Prohibition of domestic disposal; deliver to collection centers or reseller.
To Next Page
