Need help?Do you have a question about the Beninca BILL30 and is the answer not in the manual?
General| Power Supply | 230V AC |
|---|---|
| Max Gate Weight | 300 kg |
| Protection Rating | IP44 |
| Maximum Leaf Weight | 300 kg |
| Opening Time | 15 seconds |
| Operating Temperature | -20°C to +50°C |
| Cycle per day | 50 cycles |
Guidance for qualified installers on gate automation, compliance with standards, and user information.
Safety precautions regarding packaging, children, user capacity, safety devices, and original parts.
Requirements for power supply, differential switches, earthing, and safe handling of electrical parts.
Instructions on proper disposal of the product as hazardous waste, avoiding environmental harm.
Introduces the electromechanical operator and its models (BILL30M, BILL30MA) and versions.
Specifies requirements for automated gates to ensure good operation, strength, stiffness, and smooth movement.
Provides detailed technical specifications for the BILL 30M and BILL 30MA models.
Outlines the permitted maximum weight and width figures for gate leaves, considering wind effects.
Details the step-by-step procedure for installing the automatic gate system, including measurements and checks.
Explains the wiring process and connections for the BILL 30 system, including cable specifications.
Advises users not to stand in the movement area or let children play with controls.
Describes how to manually operate the gate in case of power failure or faults using a release key.
Recommends monthly checks of the manual release and periodic checks of safety devices.
To Next Page
