Beninca CP.MS4 - User Manual

CENTRALE DI COMANDO
CONTROL UNIT
STEUEREINHEIT
CENTRALE DE COMMANDE
CENTRAL DE MANDO
CENTRALKA STEROWANIA
L8542396
Rev. 01/08/03
CP.MS4
Libro istruzioni
Operating instructions
Betriebsanleitung
Livret d’instructions
Manual de instrucciones
Książeczka z instrukcjami
UNIONE NAZIONALE COSTRUTTORI
AUTOMATISMI PER CANCELLI, PORTE,
SERRANDE ED AFFINI
www.gałecki.pl

Beninca CP.MS4 Specifications

General

Brand	Beninca
Model	CP.MS4
Category	Control Unit
Language	English

Summary

To Check Connections

Function of Trimmers

ENC

Adjusts optical sensor sensitivity for obstacle detection.

PW

Adjusts motor torque for operation.

TCA

Adjusts automatic closing time from 1 to 90 seconds.

DIP-Switch Function

DIP 1 SCA;II°ch

Sets SCA/II°ch output mode (indicator light or radio channel).

DIP 2 PRELAM.

Enables or disables the forewarning flashing light.

DIP 3 BLI

Enables or disables the Step-by-Step (PP) input during opening.

DIP 4 P.P. Mod

Selects operating modes for push-button and transmitters.

DIP 5 Test DM

Activates/deactivates FotoTest and single fault control features.

DIP 6 SLWD

Enables or disables the braking function for motors.

Learning of Opening and Closing Positions

LED Diagnostics

Configuration With Built-in Receiver

Memorising Transmitter (P.P. Function)

Procedure to memorize a new transmitter using the P.P. function.

Memorising Transmitter (2 nd Radio Channel)

Procedure to memorize transmitter for 2nd radio channel output.