Need help?Do you have a question about the Beninca CP.B24 and is the answer not in the manual?
General| Motor Power Supply | 24V DC |
|---|---|
| Operating Voltage | 230V AC |
| Output Type | Relay |
| Power Supply | 230 Vac (50-60Hz) |
| Outputs | 2 |
| Operating Temperature | -20°C / +50°C |
Important safety instructions and precautions for installation and use.
Description of terminals, functions, and their connections for the control unit.
Essential steps to verify motor and limit switch connections before programming.
Guide to navigating and using the control unit's programming keys and interface.
Configuration options for automatic closure, pedestrian opening, and anti-crash sensitivity.
Enabling/disabling automatic closure, multi-flat function, rapid closure, and service man operations.
Configuring service light output and selecting motor mount direction.
Assigning and erasing transmitter codes for step-by-step and other functions.
Displaying cycle counts, performing self-calibration, and resetting the control unit.
Checking system fuses and interpreting diagnostic indicators for troubleshooting.
Understanding fault messages and the functionality of the emergency battery backup.
To Next Page
