Beninca CP.BULL OMI User Manual

DRAFT
CP.BULL OMI
UNIONE NAZIONALE COSTRUTTORI
AUTOMATISMI PER CANCELLI, PORTE
SERRANDE ED AFFINI
IT
EN

Beninca CP.BULL OMI Specifications

General

Brand	Beninca
Model	CP.BULL OMI
Category	Control Unit
Language	English

Summary

Parameters

Speed Adjustment (FSto/FStc)

Adjusts the opening and closing speeds of the gate leaf.

Logic Settings

General Safety Warnings

Product Usage and Manufacturer Responsibility

General warnings on intended use, potential damage, and manufacturer liability.

Installation and User Guidelines

Instructions for qualified installers and end-user information.

Control Unit Functions

Input/Output Functions

Detailed description of all terminal inputs and outputs for the control unit.

Programming Overview

Introduction to the control unit's programming menus and logic settings.

Programming and Settings

Accessing Programming Menus

Step-by-step guide to access and navigate the programming interface.

Self-Learning and Anti-Crushing

Procedure for self-learning the stroke and setting the anti-crushing device.

Parameters, Logic, and Special Functions

Detailed descriptions of available parameters, logic settings, and special functions.

Function Customization and Diagnostics

Control Unit Reset

Resets the control unit to its default factory values.

System Configuration and Motor Setup

Autoset Procedure

Password Protection

Sets an access protection code for the control unit programming.

Motor Type Selection

Allows selection of control unit settings based on motor type.

Motor Speed and Braking Values

Table detailing speed, braking, and slowdown values for BULL 15 OMI.

Speed and Braking Adjustment

Door/Gate Stroke Scheme

Parameter Effects on Movement

Safety Input Activation Diagram

Safety Input Adjustment (TBR)

Important Notes on Parameters

Crucial advice on parameter settings, AUTO function, and BAR input.

Autoset Function