Need help?Do you have a question about the Beninca DA.24V and is the answer not in the manual?
General| Power Supply | 230 Vac (+/- 10%) 50 Hz |
|---|---|
| Number of Channels | 2 |
| Motor power supply | 24V DC |
| Operating Temperature | -20°C to +50°C |
| Operating Voltage | 24V |
| Protection Degree | IP55 |
Declaration pursuant to EU directives for electromagnetic compatibility and electrical safety standards.
Crucial safety guidelines for electrical installation, wiring separation, and system protection.
Details control unit supply, power, motor capacity, protection level, and operating temperature.
Describes the purpose and connection for each terminal on the control unit.
Adjusts motor speed during braking and obstacle detection sensitivity.
Configures automatic closure, forewarning flashing light, and other operational modes.
Configures light modes, multi-flat function, and sensor behavior during braking.
Explains how to adjust motor speed using a Faston connector on the transformer.
Describes the function of self-diagnostic LEDs for checking system status and faults.
Instructions for proper disposal of the product according to regulations.
To Next Page
