Beninca SA03 - User Manual

L8542785
Rev. 09/03/00
SA03
CENTRALINA A MICROPROCESSORE
CONTROL UNIT WITH MICROCONTROLLER
MIKROCONTROLLER-STEUERUNG
CENTRALE A MICROCONTRÔLEUR
CENTRALITA A MICROPROCESADOR
Libro istruzioni
Operating instructions
Betriebsanleitung
Livret d’instructions
Libro de instrucciones
UNIONE NAZIONALE COSTRUTTORI
AUTOMATISMI PER CANCELLI, PORTE,
SERRANDE ED AFFINI
www.gałecki.pl

Beninca SA03 Specifications

General

Brand	Beninca
Model	SA03
Category	Control Unit
Language	English

Summary

Beninca SA03 Control Unit Overview

Product Identification

Identifies the BENINCA SA03 control unit with microcontroller.

EC Declaration of Conformity

Applicable Directives and Standards

Lists relevant EU directives (EMC, Low Voltage) and harmonized standards.

SA03 Control Unit Installation and Operation

Installation Instructions

Covers electrical installation, cable routing, connections, and dip-switch settings.

Input;Output Functions

Details the purpose and connection of each input and output terminal.

Dip-Switch Functions

Explains the configuration options provided by the unit's dip-switches.

Control Unit Configuration

Trimmer Functions

Details the adjustment capabilities of TCA, TL, and TRAC trimmers.

Programming Remote Controls

Procedures for cancelling and memorising remote control codes.

Motor Power Adjustment

Describes how to adjust motor power using a faston connector.