Bennett Marine Lenco-to-BOLT User Manual

13
14
Lenco-to-BOLT Electric Upgrade Kit Instructions
BQE127 r040618
Need Installation Help? We’re here to assist. Call Bennett Marine at (954) 427-1400.
1
2
3
4
5
6
7
8
9
10
11
12
PART PART NO. QTY.
1
BQE Upper Hinge, Triangular Base (W/ ru Hole)
BQE86-2 2
2
BQE Lower Hinge, Triangular Base (No ru Hole)
BQE86-1 2
3
BQE Upper Hinge Grommet
BQE87 2
4
Hex Head Bolt 5/16-18 x 1-3/4, 18-8 SS
ML432 4
5
Screw Mach Pan Head PHI 1/4-20 X 1.0, 18-8 SS
ML433 6
6
.032" Flat Washers, 18-8 SS
ML450 8
7
Low Prole Hex Nut, 18-8 SS
ML453 4
PART PART NO. QTY.
8
1/4" X 5/8 Flat Washer, 18-8 SS
ML294 6
9
1/4-20 Nylon Locking Nut SS, 18-8 SS
ML267 6
10
Screw # 14 x 1-1/2 SMS, 18-8 SS
HP2 6
11
Waterproof Plug, 2 Pos, 16 Gauge
ML343 1
12
Wedge Lock Plug, Waterproof 2 Pos.
ML345 1
13
BQE Upper Hinge, Bennett Adapter
BQE82 2
14
BQE Lower Hinge, Triangular Base
ACT1 2
For warranty details, or general trim tab operation information, visit BennettTrimTabs.com.
Triangular
Upper Hinge
Base Option
How To Determine Compatibility
Assembly
Diagram
Kit Part Number:
BOLTLKCON
12 1/2"
X X XXX
Bennett Lenco-to-BOLT Upgrade Kit is compatible with
Lenco “Standard Mount”, “Standard Performance”, and
“Edge Mount” systems.
To determine whether or not your Lenco actuators meet the
Compatibility requirements, locate the identication stamp
(available since approximately May 2008). e actuator type is
indicated by the second number in the 5-digit code.
Lenco actuators with either “A”, “B” or “G” indicated as the second
digit in the 5-digit code sequence are compatible with the Bennett
Lenco-to-BOLT Upgrade Kit.
Short stroke Lenco actuators (11-3/8" and 10-7/8" actuator length),
and long stroke Lenco actuators (14" and 13" actuator length) are
NOT compatible.
Bennett Adapter
Upper Hinge
Option

Bennett Marine Lenco-to-BOLT Specifications

General

Brand	Bennett Marine
Model	Lenco-to-BOLT
Category	Marine Equipment
Language	English

Summary

How To Determine Compatibility

Compatibility Requirements

Lenco actuators with 'A', 'B' or 'G' as the second digit in the 5-digit code are compatible.

Incompatible Actuator Lengths

Short stroke (11-3/8", 10-7/8") and long stroke (14", 13") Lenco actuators are not compatible.

Installation of Adjustable Upper Hinge

Removal of Existing Lenco Actuator

Steps to safely disconnect and remove the existing Lenco actuator from the trim tab and transom.

Mounting the New Upper Hinge

Attaching the new upper hinge to the transom and routing the electrical cable.

Connecting the Actuator

Attaching Hinge to Actuator

Securing the BOLT actuator to the upper hinge and connecting the lower hinge mount.

Electrical Connections

Wiring the actuator connector and addressing older Lenco systems without waterproof connectors.

Troubleshooting Actuator Issues

Actuators Working in Reverse

Correcting reversed actuator operation by reversing wire connections.

Actuator Not Working

Diagnosing and resolving issues where the actuator is not functioning at all.