PRESSURE CHEF OPERATION
4
• The lid (3) has a safety lock pin. The cooker will not start until the lid is closed and locked in place.
Place the lid (1) onto the outer body (7) and lock
into place by turning the “lock” triangle on the
front of the lid towards the triangular alignment
notch on the outer body.
The safety lock pin will depress when the lid is
properly closed.
The LED display on the control panel (8) shows
the amount of pressure that is being used in psi
(Pounds per Square Inch) and also shows when
the pressure is being released.
The pressure regulator (2) is used to release
pressure instantly.
WARNING:
Take care when releasing pressure with the
pressure regulator, as hot steam will escape and
can cause severe burns.
To Next Page
Loading...
