To Next PageTo Next PageWhy does my Bennett Read TOUGH 12 have weak suction power?
Weak suction power in your Bennett Read Vacuum Cleaner may be due to a dirty or clogged filter bag. Remove and clean the filter bag. Also, check for any obstructions in the flexi-hose, vacuum nozzle, or extension pipes. If there are obstructions, remove them.
What to do if my Bennett Read TOUGH 12 Vacuum Cleaner switches off during operation?
If your Bennett Read Vacuum Cleaner switches off during operation, it may be due to dirty or clogged filters, or a full filter bag. Clean or replace the filter bag. Another possible cause is an obstruction in the flexi-hose or extension tube. Check and clean these parts.
Why is dust escaping from my Bennett Read TOUGH 12 while vacuuming?
If you see dust escaping from your Bennett Read Vacuum Cleaner while vacuuming, first check that the filter bag is installed inside the dirt/water tank. If the filter bag is installed, it may be dirty. Clean the filter bag.
General| Brand | Bennett Read |
|---|---|
| Model | TOUGH 12 |
| Category | Vacuum Cleaner |
| Language | English |
Key safety warnings for fire, electric shock, and injury prevention during operation.
Identification of all parts and accessories included with the vacuum cleaner.
Guide on how to assemble and prepare the vacuum for use.
Instructions for performing dry vacuuming tasks.
Instructions for vacuuming up liquids.
Guide on using the vacuum cleaner's blower function.
Procedures for emptying and cleaning the filter bag.
Solutions for common problems encountered with the vacuum.
Details on the vacuum's electrical and capacity specifications.
