To Next PageTo Next PageHow to fix Bennett Read Tough 18 Vacuum Cleaner that is not switching on?
If your Bennett Read Vacuum Cleaner isn't switching on, the power cord may not be firmly plugged in or the wall socket isn't switched on. Check the electrical plug to ensure it is properly connected and the outlet is active.
Why does my Bennett Read Vacuum Cleaner have weak suction?
If your Bennett Read Vacuum Cleaner has weak suction, the microparticle filter may be dirty or clogged. You should remove and clean the microparticle filter regularly. Also, check for any obstructions in the flexi-hose, vacuum nozzle, or extension pipes. If there are, remove the flexi-hose, nozzle, and extension pipes, then clean to remove any obstructions.
What to do if my Bennett Read Vacuum Cleaner switches off during operation?
If your Bennett Read Vacuum Cleaner switches off during operation, it could be due to dirty or clogged filters, a full dirt/water tank, or an obstruction in the flexi-hose or extension tube. Clean or replace all filters and check/clean the flexi-hose and the extension tube.
Why is dust escaping from my Bennett Read Vacuum Cleaner?
If you see dust escaping from your Bennett Read Vacuum Cleaner while vacuuming, the microparticle filter may not be installed or may be dirty. Check that the microparticle filter is situated underneath the motor unit. If it is installed, clean the microparticle filter.
General| Brand | Bennett Read |
|---|---|
| Model | Tough 18 |
| Category | Vacuum Cleaner |
| Language | English |
Essential safety guidelines and warnings to prevent fire, electric shock, injury, and ensure proper usage.
Critical warnings regarding electrical hazards, moving parts, outdoor use, and specific operational restrictions.
Identification and description of the main parts of the Bennett Read Tough 18 vacuum cleaner.
List and identification of all accessories provided with the Bennett Read Tough 18 vacuum cleaner.
Detailed instructions for assembling the Bennett Read Tough 18 vacuum cleaner from its packaging.
Initial steps for preparing the vacuum for dry cleaning, including motor unit removal.
Completing the setup for dry vacuuming, attaching hoses, wands, and nozzles.
Instructions for preparing the vacuum for wet cleaning, including filter removal and tank preparation.
Completing wet vacuuming setup and important warnings about liquid types and tank capacity.
Instructions on how to set up and use the blower function of the Tough 18 vacuum cleaner.
Final steps for using the blower function, including attaching accessories and operating the unit.
Procedure for safely emptying the dirt and water from the vacuum cleaner's tank.
Step-by-step guide on how to clean the washable microparticle filter for optimal performance.
Details about the product guarantee, extension options, and conditions for repair or replacement.
How to get in touch for guarantee and service enquiries, including phone numbers and website.
