To Next Page
C
Clifford WilliamsAug 4, 2025
Why is my Bennett Read Vacuum Cleaner not vacuuming effectively?
- JjohnsondonnaAug 4, 2025
Your Bennett Read Vacuum Cleaner might not be vacuuming effectively due to several reasons. Check for blockages in the tools, hose, or extension wands by removing each part and inspecting them. Dirty filters can also cause this issue; follow the instructions on pages 7-9 for cleaning them. Ensure the dirt container isn't full by following the emptying instructions on page 6. Verify that the hose connector is securely attached to the suction inlet, and inspect the hose for cracks or holes, replacing it if necessary. Make sure the air-flow regulator is set to closed. Finally, check for and clear any blockages in the dirt container, following steps 1 to 7.
General
