Why does my Bennett Read STEALTH have weak suction power?
Weak suction power in your Bennett Read Vacuum Cleaner can be due to a dirty or full filter/bag. Remove and clean all filters regularly. Also, check for any obstructions in the flex hose, vacuum nozzle, or extension pipes. Remove these parts and clean them to ensure proper airflow.
What to do if my Bennett Read Vacuum Cleaner switches off during operation?
If your Bennett Read Vacuum Cleaner switches off during operation, it might be due to the thermal cut-off switch being activated. This can happen if the filters are dirty, the dust bag is full, or there is an obstruction in the flex hose or extension tubes. Clean or replace the filters and check/clean the flex hose and extension tubes.
How to fix a Bennett Read Vacuum Cleaner that is not switching on?
If your Bennett Read Vacuum Cleaner isn't switching on, the power cord might not be firmly plugged in or the wall socket isn't switched on. Check the electrical plug to ensure it is properly connected and the socket is active.
Why is dust escaping from my Bennett Read STEALTH while vacuuming?
Visible dust escaping from your Bennett Read Vacuum Cleaner during operation can be caused by filters or the dust bag not being installed correctly. Ensure that all filters and the bag are properly installed. Another cause may be a dirty or full filter/dust bag, so clean all filters and the bag.
General| Brand | Bennett Read |
|---|---|
| Model | STEALTH |
| Category | Vacuum Cleaner |
| Language | English |
Key safety precautions to mitigate risks of fire, electric shock, or personal injury during operation.
Safety advice regarding moving parts and reducing the risk of electric shock during cleaning or servicing.
The vacuum cleaner is exclusively designed for dry vacuuming and must not be used with liquids.
Instructions for cleaning the various filters of the vacuum cleaner.
Guidance on washing the washable filters and drying them properly.
To Next Page