5
OPERATIONS
Only operate your Bennett Read Stealth in accordance with the instruction manual. Failure to
follow these instructions will result in decreased cleaning performance and may invalidate your
guarantee.
7. Insert the front caster
wheels (9) at the bottom
of the Dirt Tank (4) into the
holes provided, ensuring
wheel is fully inserted
[see picture below]
[Repeat for both front
wheels]
8. Install Rear wheel assembly by
screwing in as shown below:
9. Turn the Dirt Tank [4] onto its wheels
10.Your Stealth is now ready to be set up for your desired
application.
Note: The Wheels are marked 1 and 2
1 being left side and 2 being right side
Important: The Bennett Read Stealth is only suitable for DRY Vacuuming and must NOT be
used to vacuum any liquids
Front Caster Wheels Rear Wheels
To Next Page
Loading...
Need help?
General
