4
ASSEMBLY INSTRUCTIONS:
Tools needed: Philips Screwdriver
1. Remove unit from packaging
2. Remove attachments from their packaging
3. Some of the packaging poses a choking risk to small children. Dispose of the
packaging responsibly. Please recycle all paper and plastic packaging
4. Before using for the first time check that all attachments listed are included. If
the unit is incomplete, return to the retailer immediately. Take entire unit,
packaging and proof of purchase to the store where your purchase was made
5. Attach the Wheel Housings and
secure with the supplied screws:
6. Completely insert the Caster
Wheels (6) into the holes as shown:
OPERATION
Only operate your Bennett Read Tough 18 in accordance with the instruction manual. Failure
to follow these instructions will result in decreased cleaning performance and may invalidate
your guarantee.
DRY VACUUMING:
Your Bennett Read Tough 18 Vacuum is perfect for vacuuming carpets, tiles, mattresses, upholstery,
curtains and car upholstery.
Setting up your Bennett Read Tough 18 for dry vacuuming:
1. Remove the Motor Unit (2) from the Dirt/Water Tank (4) by pulling the Locking Clips (3) outwards
To Next Page
Loading...
