To Next PageTo Next Page
Need help?Do you have a question about the Benning CM 1 and is the answer not in the manual?
General| Data hold | Yes |
|---|---|
| Jaw opening | 30 mm |
| Safety | CAT III 600 V |
| AC voltage range | 0.1V to 600V |
| DC voltage range | 0.1V to 600V |
| AC current range | 0.1A to 600A |
| Power Supply | 2 x AAA batteries |
Details on the digital display, polarity, overload indication, and measurement rate.
Specifies input resistance, resolution, measurement accuracy, and overload protection for DC measurements.
Details input resistance, resolution, AC measurement accuracy, and overload protection.
Provides no-load voltage, test current, measurement accuracy, and overload protection for resistance tests.
Describes the built-in buzzer function for continuity testing below 25 Ω.
Details measurement accuracy and overload protection for AC current measurements.
Instructions on storing, using, and checking the multimeter and its accessories before use.
Guidelines for performing DC and AC voltage measurements safely and accurately.
Steps for measuring resistance, including notes on ensuring no voltage is applied.
Procedure for using the continuity test function and interpreting the buzzer feedback.
Instructions for preparing and performing AC current measurements using the fork.
Procedures to ensure the unit is safe before performing maintenance or cleaning.
Guidelines for cleaning the exterior of the multimeter and battery compartment.
Step-by-step instructions on how to replace the 9 V battery.
