Need help?Do you have a question about the Benning MM 2 and is the answer not in the manual?
General| Continuity test | Yes |
|---|---|
| Diode test | Yes |
| Measuring category | CAT III 600 V |
| Basic accuracy | 0.5% |
| Temperature | -20 °C - +760 °C (with temperature probe) |
| Special functions | Data hold, Relative measurement |
| Current AC | 0.1mA - 10A |
| Current DC | 0.1mA - 10A |
Details the digital display, polarity, overranging, measuring rate, and power of the BENNING MM 2.
Specifies ranges, resolutions, accuracy, and overload protection for DC voltage measurements.
Specifies ranges, resolutions, accuracy, and overload protection for AC voltage measurements.
Specifies ranges, resolutions, accuracy, and burden voltage for DC current measurements.
Specifies ranges, resolutions, accuracy, and burden voltage for AC current measurements.
Specifies ranges, resolutions, accuracy, and overload protection for resistance measurements.
Specifies accuracy, overload protection, and buzzer function for continuity and diode tests.
Details essential preparation steps before using the BENNING MM 2 for measurements.
Instructions and safety precautions for performing voltage and current measurements.
Step-by-step guide for replacing the 9 V battery in the BENNING MM 2.
Instructions for replacing the internal fuses in the BENNING MM 2 multimeter.
Information on calibration services and recommended recalibration intervals.
Lists part numbers for replacement fuses for the BENNING MM 2 multimeter.
To Next Page
