Do you have a question about the Benning MM 3 and is the answer not in the manual?
Diode test | Yes |
---|---|
Product type | Digital multimeter |
Product color | Black, Red |
Frequency range | 0.001 - 200 kHz |
AC current range | 0.0000001 - 20 A |
DC voltage range | 0.001 - 600 V |
Resistance range | 0.1 - 20000000 Ω |
Capacitance range | 0.0001 - 200000 nF |
Measuring category | CAT III 300V |
Placement supported | Handheld multimeter |
Battery type | 9V |
Power source | Battery |
Battery voltage | 9 V |
Number of batteries supported | 1 |
Display digits | 4 digits |
Depth | 31 mm |
---|---|
Width | 84 mm |
Height | 175 mm |
Weight | 340 g |
Provides general specifications for the BENNING MM 3 multimeter.
Details ranges, resolution, accuracy, and overload protection for DC voltage.
Details ranges, resolution, accuracy, and overload protection for AC voltage.
Details ranges, resolution, accuracy, and overload protection for DC current.
Details ranges, resolution, accuracy, and overload protection for AC current.
Details ranges, resolution, accuracy, and test current for resistance.
Specifies accuracy and conditions for diode and continuity tests.
Details ranges, resolution, accuracy, and frequency for capacitance.
Details ranges, resolution, accuracy, and overload protection for frequency.
Covers essential steps before performing measurements.
Guides on how to measure voltage and current.
Instructions for performing resistance measurements.
Procedures and expected results for diode testing.
How to perform continuity tests and interpret buzzer feedback.
Steps and precautions for measuring capacitance.
Instructions on how to measure frequency.
Guidelines for ensuring instrument safety and when to stop use.
Instructions on how to clean the multimeter.
Step-by-step guide for replacing the battery.
Procedures for safely replacing fuses.
Recommendation for recalibrating the instrument.