To Next PageTo Next Page
Need help?Do you have a question about the Benning MM P3 and is the answer not in the manual?
General| Product type | Digital multimeter |
|---|---|
| Product color | Black, Red |
| Frequency range | 0.000001 - 5000 kHz |
| AC voltage range | 0.0001 - 600 V |
| Continuity check | Yes |
| Resistance range | 0.1 - 40 Ω |
| Capacitance range | 0.01 - 100000 nF |
| Measuring category | CAT III 300V |
| Placement supported | Handheld multimeter |
| Test lead length | 0.6 m |
| Power source | Battery |
| Battery voltage | 1.5 V |
| Battery technology | Alkaline |
| Number of batteries supported | 2 |
| Operating altitude | 0 - 2000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
Weight and Dimensions| Depth | 86 mm |
|---|---|
| Width | 132 mm |
| Height | 19 mm |
| Weight | 130 g |
Check the device and cables for damages before starting operation.
Instructions on when to switch off the device for safety reasons.
Details measuring ranges, resolution, accuracy, and overload protection for DC voltage.
Details measuring ranges, accuracy, and overload protection for AC voltage.
Details measuring ranges, accuracy, and maximum open-circuit voltage.
Specifies overload protection and buzzer threshold for diode and continuity tests.
Lists capacity ranges, resolution, accuracy, and overload protection.
Details frequency ranges, accuracy, and sensitivity for square wave and sinusoidal signals.
Specifies measuring accuracy and sensitivity for pulse duty ratio of square waves.
Covers operating/storage conditions, care of measuring lines, and interference sources.
Guides on selecting functions, connecting probes, and reading values for voltage.
