Benning MM P3 - Page 18

12/ 2007 BENNING MM P3
19

Operating manual
BENNING MM P3
Digital multimeter for
- DC voltage measurements
- AC voltage measurements
- resistance measurements
- diode tests
- continuity tests
- capacity measurements
- frequency measurements
- pulse duty factor measurement
Table of contents
1. User instructions
2. Safety instructions
3. Scope of delivery
4. Device description
5. General information
6. Ambient conditions
7. Electricalspecications
8. Measuring with the BENNING MM P3
9. Maintenance
10. Using the protective case
11. Environmental protection
1. User information
This operating manual is intended for
- skilled electricians and
- electrotechnically trained personnel.
The BENNING MM P3 is intended for measurements under dry ambient conditions. It
must not be used in electrical circuits with a nominal voltage higher than 600 V DC or
AC (see section 6 „Ambient conditions“ for details).
The following symbols are used in this operating manual and on the
BENNING MM P3:

Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to persons.

Important, must comply with documentation!
This symbol indicates that the information provided in the operating manual
must be complied with in order to avoid risks.